WEKO3
アイテム
モデル/ビュー分離アーキテクチャBeaMの機構とその評価
https://ipsj.ixsq.nii.ac.jp/records/11849
https://ipsj.ixsq.nii.ac.jp/records/118498b1e99a3-256a-462c-85db-d7c3b8090896
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
|
|
Copyright (c) 2001 by the Information Processing Society of Japan
|
|
| オープンアクセス | ||
| Item type | Journal(1) | |||||||
|---|---|---|---|---|---|---|---|---|
| 公開日 | 2001-10-15 | |||||||
| タイトル | ||||||||
| タイトル | モデル/ビュー分離アーキテクチャBeaMの機構とその評価 | |||||||
| タイトル | ||||||||
| 言語 | en | |||||||
| タイトル | The Mechanism of the Model-View Separation Architecture BeaM and Its Evaluation | |||||||
| 言語 | ||||||||
| 言語 | jpn | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | 論文 | |||||||
| 資源タイプ | ||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||||
| 資源タイプ | journal article | |||||||
| その他タイトル | ||||||||
| その他のタイトル | 開発技術 | |||||||
| 著者所属 | ||||||||
| 早稲田大学理工学部 | ||||||||
| 著者所属 | ||||||||
| 早稲田大学理工学部 | ||||||||
| 著者所属 | ||||||||
| 早稲田大学理工学部 | ||||||||
| 著者所属(英) | ||||||||
| en | ||||||||
| School of Science and Engineering, Waseda University | ||||||||
| 著者所属(英) | ||||||||
| en | ||||||||
| School of Science and Engineering, Waseda University | ||||||||
| 著者所属(英) | ||||||||
| en | ||||||||
| School of Science and Engineering, Waseda University | ||||||||
| 著者名 |
鷲崎, 弘宜
白銀, 純子
深澤, 良彰
× 鷲崎, 弘宜 白銀, 純子 深澤, 良彰
|
|||||||
| 著者名(英) |
Hironori, Washizaki
Junko, Shirogane
Yoshiaki, Fukazawa
× Hironori, Washizaki Junko, Shirogane Yoshiaki, Fukazawa
|
|||||||
| 論文抄録 | ||||||||
| 内容記述タイプ | Other | |||||||
| 内容記述 | GUIアプリケーションの開発時に,最も基本的な汎用コンポーネントを組み合せ,さらにアプリケーションロジックを付加することで,特定のアプリケーションドメインに特化された,クラスレベルでの再利用を目的とするGUIアプリケーション部品を開発,利用することがある.従来の手法では,GUIアプリケーション部品内部でのアプリケーションロジックとGUI部分との依存性の排除は不完全なものであり,結果として部品全体の再利用性および拡張性の欠如をもたらす.本稿ではGUIアプリケーション部品の開発において,アプリケーションロジック部とGUI部が相互に依存しないアーキテクチャBeaMを提案し,Java言語による実装を行った結果についての評価を行う. | |||||||
| 論文抄録(英) | ||||||||
| 内容記述タイプ | Other | |||||||
| 内容記述 | GUI application components, which are developed by combining the most atomic GUI components and appending the required application logic, have been widely utilized. Their target is domain-specific and instance-level software reuse. In conventional methods, the separation between its application logic part and GUI part is incomplete. As the results, enough reusability and extensibility of the GUI application components can not be obtained. In this paper, we propose a Model-View separation architecture, ``BeaM'', which realizes the fully independence between application logic part and GUI part. Also the evaluation results are analyzed based on the implementation in Java language. | |||||||
| 書誌レコードID | ||||||||
| 収録物識別子タイプ | NCID | |||||||
| 収録物識別子 | AN00116647 | |||||||
| 書誌情報 |
情報処理学会論文誌 巻 42, 号 10, p. 2454-2465, 発行日 2001-10-15 |
|||||||
| ISSN | ||||||||
| 収録物識別子タイプ | ISSN | |||||||
| 収録物識別子 | 1882-7764 | |||||||