WEKO3
アイテム
楕円当てはめの精度比較:最小二乗法から超精度くりこみ法まで
https://ipsj.ixsq.nii.ac.jp/records/80156
https://ipsj.ixsq.nii.ac.jp/records/80156b4365653-2335-43fb-a3ed-c2b95534c2f4
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]() |
Copyright (c) 2012 by the Information Processing Society of Japan
|
|
オープンアクセス |
Item type | SIG Technical Reports(1) | |||||||
---|---|---|---|---|---|---|---|---|
公開日 | 2012-01-12 | |||||||
タイトル | ||||||||
タイトル | 楕円当てはめの精度比較:最小二乗法から超精度くりこみ法まで | |||||||
タイトル | ||||||||
言語 | en | |||||||
タイトル | Accuracy Comparison of Ellipse Fitting: From Least Squares to Hyper-Renormalization | |||||||
言語 | ||||||||
言語 | jpn | |||||||
資源タイプ | ||||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_18gh | |||||||
資源タイプ | technical report | |||||||
著者所属 | ||||||||
岡山大学大学院自然科学研究科 | ||||||||
著者所属 | ||||||||
豊橋技術科学大学情報工学系 | ||||||||
著者所属 | ||||||||
豊橋技術科学大学情報工学系 | ||||||||
著者所属 | ||||||||
岡山大学大学院自然科学研究科 | ||||||||
著者所属(英) | ||||||||
en | ||||||||
Department of Computer Science, Okayama University | ||||||||
著者所属(英) | ||||||||
en | ||||||||
Department of Information and Computer Sciences, Toyohashi University of Technology | ||||||||
著者所属(英) | ||||||||
en | ||||||||
Department of Information and Computer Sciences, Toyohashi University of Technology | ||||||||
著者所属(英) | ||||||||
en | ||||||||
Department of Computer Science, Okayama University | ||||||||
著者名 |
横田, 健太
村田, 和洋
菅谷, 保之
金谷, 健一
× 横田, 健太 村田, 和洋 菅谷, 保之 金谷, 健一
|
|||||||
著者名(英) |
Kenta, Yokota
Kazuhiro, Murata
Yasuyuki, Sugaya
Kenichi, Kanatani
× Kenta, Yokota Kazuhiro, Murata Yasuyuki, Sugaya Kenichi, Kanatani
|
|||||||
論文抄録 | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | 画像から抽出した点列に楕円を当てはめる手法として,「最小二乗法」とそれを反復的に改善する「重み反復法」,「Taubin法」とそれを反復的に改善する「くりこみ法」,「超精度最小二乗法」とそれを反復的に改善する「超精度くりこみ法」,再投影誤差を最小にする「最尤推定」とそれを事後的に補正する「超精度補正」をまとめる.そして,これらの精度を実験的に比較し,次のことを示す.1. 従来から最尤推定が最も高精度であるとみなされていたが,新たに提案された超精度くりこみ法はそれよりさらに精度が高い.2. 最も精度が高いのは超精度補正であるが,超精度くりこみ法との差は非常にわずかである.3. 最尤推定解の計算はノイズが大きいと収束しないことがあるのに対して,超精度くりこみ法はノイズに対してロバストである.これらの結果から,実用的には超精度くりこみ法が最も優れた方法であることを結論する. | |||||||
論文抄録(英) | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | We summarize the following techniques for fitting an ellipse to a point sequence extracted from an image: “least squares” and its update by “iterative reweight”, the “Taubin method” and its iterative update by “renormalization”, “HyperLS” and its iterative update by “hyper-renormalization”, “maximum likelihood (ML)” which minimize the reprojection error and its a posteriori “hyperaccurate correction”. We experimentally compare their accuracy and show the following: 1. Newly proposed hyper-renormalization is more accurate than ML, which has been widely regarded as the most accurate. 2. The most accurate is the hyperaccurate correction of ML, but the difference from hyper-renormalization is very small. 3. While iterations for computing ML may not always converge in the presence of large noise, Hyper-renormalization is more robust that ML. From these, we conclude that hyper-renormalization is the best method in practical situations. | |||||||
書誌レコードID | ||||||||
収録物識別子タイプ | NCID | |||||||
収録物識別子 | AA11131797 | |||||||
書誌情報 |
研究報告コンピュータビジョンとイメージメディア(CVIM) 巻 2012-CVIM-180, 号 24, p. 1-8, 発行日 2012-01-12 |
|||||||
Notice | ||||||||
SIG Technical Reports are nonrefereed and hence may later appear in any journals, conferences, symposia, etc. | ||||||||
出版者 | ||||||||
言語 | ja | |||||||
出版者 | 情報処理学会 |