WEKO3
アイテム
手描き平面曲線からの対数美的曲面創成システムの開発
https://ipsj.ixsq.nii.ac.jp/records/66531
https://ipsj.ixsq.nii.ac.jp/records/66531cbe3dde4-0364-4444-9869-a9cd3971ad90
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]() |
Copyright (c) 2009 by the Information Processing Society of Japan
|
|
オープンアクセス |
Item type | SIG Technical Reports(1) | |||||||
---|---|---|---|---|---|---|---|---|
公開日 | 2009-10-29 | |||||||
タイトル | ||||||||
タイトル | 手描き平面曲線からの対数美的曲面創成システムの開発 | |||||||
タイトル | ||||||||
言語 | en | |||||||
タイトル | A generation of log-aesthetic curved surface from hand-drawing plane curves | |||||||
言語 | ||||||||
言語 | jpn | |||||||
キーワード | ||||||||
主題Scheme | Other | |||||||
主題 | セッション2: ジオメトリー | |||||||
資源タイプ | ||||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_18gh | |||||||
資源タイプ | technical report | |||||||
著者所属 | ||||||||
値 | 和歌山大学大学院 | |||||||
著者所属 | ||||||||
値 | 和歌山大学 | |||||||
著者所属 | ||||||||
値 | 和歌山大学大学院 | |||||||
著者所属(英) | ||||||||
言語 | en | |||||||
値 | Graduate School of Wakayama University | |||||||
著者所属(英) | ||||||||
言語 | en | |||||||
値 | Wakayama University | |||||||
著者所属(英) | ||||||||
言語 | en | |||||||
値 | Graduate School of Wakayama University | |||||||
著者名 |
伊丹, 裕美
× 伊丹, 裕美
|
|||||||
著者名(英) |
Hiromi, Itami
× Hiromi, Itami
|
|||||||
論文抄録 | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | 一般的に,製品デザインを図面化する際,デザイナが描いたスケッチ上の構成点を CAD 上に点列として入力し,それらを用いて平面曲線に近似する.次に投影面の異なる 2 本の平面曲線から空間曲線を合成し,その空間曲線をキーラインとして曲面設計を行っている.しかし,デザイナがスケッチ段階で意図した平面曲線を描けたとしても,創成された空間曲線や曲面は必ずしもデザイナの意図した性質を持っていない場合がある.そこで本研究では,デザイナが CAD 上に直接手描き入力した 2 つの投影面における平面曲線から,図面として使える美しい空間曲線を効率的に創成するシステムを開発した.また,創成した空間曲線を用いて美しい曲面を創成するシステムを開発した.本システムによる曲面創成シミュレーションを通して,不明確であった基準線である対数美的空間曲線の捩率変化を同定することが可能となった. | |||||||
論文抄録(英) | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | Generally, when designers draw an industrial product, they first input every sets of constitutional points of curves on the sketches drawn by designers into CAD. Next, they approximate a plane spline curve using the set of points on a computer and compound a space curve from two plane curves on various projections. Finaly, they make a curved surface by the space curves as a key line. However, even if designers can draw a plane curve in their mind on the sketches, the compound space curve is not always a log-aesthetic space curve. Then, the aim of this study is to develop a system to efficiently make a log-aesthetic space curve from two hand-drawing plane curves drawn into a pen-display device directly and to make a log-aesthetic curved surface using the log-aesthetic space curves. We could identify obscure torsion change of a log-aesthetic space curve through simulating this system. | |||||||
書誌レコードID | ||||||||
収録物識別子タイプ | NCID | |||||||
収録物識別子 | AN10100541 | |||||||
書誌情報 |
研究報告グラフィクスとCAD(CG) 巻 2009-CG-137, 号 9, p. 1-6, 発行日 2009-10-29 |
|||||||
Notice | ||||||||
値 | SIG Technical Reports are nonrefereed and hence may later appear in any journals, conferences, symposia, etc. | |||||||
出版者 | ||||||||
言語 | ja | |||||||
出版者 | 情報処理学会 |