WEKO3
アイテム
メッシュモデルを用いた形状近似における品質評価法
https://ipsj.ixsq.nii.ac.jp/records/41465
https://ipsj.ixsq.nii.ac.jp/records/414655048922b-b626-42ce-a76e-aeefbb419a79
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]() |
Copyright (c) 2001 by the Information Processing Society of Japan
|
|
オープンアクセス |
Item type | SIG Technical Reports(1) | |||||||
---|---|---|---|---|---|---|---|---|
公開日 | 2001-03-02 | |||||||
タイトル | ||||||||
タイトル | メッシュモデルを用いた形状近似における品質評価法 | |||||||
タイトル | ||||||||
言語 | en | |||||||
タイトル | Quality Evaluation Method for Shape Approximation using Mesh Model | |||||||
言語 | ||||||||
言語 | jpn | |||||||
資源タイプ | ||||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_18gh | |||||||
資源タイプ | technical report | |||||||
著者所属 | ||||||||
富山大学工学部電気電子システム工学科 | ||||||||
著者所属 | ||||||||
富山大学工学部電気電子システム工学科 | ||||||||
著者所属 | ||||||||
富山大学工学部電気電子システム工学科 | ||||||||
著者所属(英) | ||||||||
en | ||||||||
Department of Electrical and Electronic Engineering, Faculty of Engineering, Toyama University | ||||||||
著者所属(英) | ||||||||
en | ||||||||
Department of Electrical and Electronic Engineering, Faculty of Engineering, Toyama University | ||||||||
著者所属(英) | ||||||||
en | ||||||||
Department of Electrical and Electronic Engineering, Faculty of Engineering, Toyama University | ||||||||
著者名 |
宮田, 高道
堀田, 裕弘
村井, 忠邦
× 宮田, 高道 堀田, 裕弘 村井, 忠邦
|
|||||||
著者名(英) |
Miyata, Takamichi
Horita, Yuukou
Murai, Tadakuni
× Miyata, Takamichi Horita, Yuukou Murai, Tadakuni
|
|||||||
論文抄録 | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | 三角形メッシュを使用して3次元の物体形状を表現するMarching Cubes法は、3次元物体をディジタルコンテンツとして取り扱う場合の有名なモデリング技術である。三角形メッシュを用いて3次元の物体形状を表現しても、その情報量は膨大である。その結果、これらをデータ圧縮か単純化表現を実行することが必要となる。しかしながら、情報圧縮および単純化表現を実行した後、どれ位、原物体形状を保持しているかを主観的に評価することは困難である。本稿の目的は、形状近似によって3次元物体の知覚的な劣化を評価する方法の確立である。 | |||||||
論文抄録(英) | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | The Marching Cubes method which expresses 3-dimensional shape using triangle meshes is a well-known modeling technology in the case of dealing with 3-dimensional object as digital contents. Even if it expresses 3-dimensional shape by using triangle meshes, the amount of information is huge, so that it is necessary to carry out the data compression or simplification representation. However, after performing information compression and simplification expression, it is difficult to evaluate subjectively which holds the shape of original object. The purpose of this paper is establishing the method which evaluates the visible degradation of the 3-dimensional object by shape approximation. | |||||||
書誌レコードID | ||||||||
収録物識別子タイプ | NCID | |||||||
収録物識別子 | AN10438399 | |||||||
書誌情報 |
情報処理学会研究報告オーディオビジュアル複合情報処理(AVM) 巻 2001, 号 19(2000-AVM-032), p. 83-88, 発行日 2001-03-02 |
|||||||
Notice | ||||||||
SIG Technical Reports are nonrefereed and hence may later appear in any journals, conferences, symposia, etc. | ||||||||
出版者 | ||||||||
言語 | ja | |||||||
出版者 | 情報処理学会 |