WEKO3
アイテム
IoT用センサ端末ソフトウェア自動生成システム
https://ipsj.ixsq.nii.ac.jp/records/239452
https://ipsj.ixsq.nii.ac.jp/records/239452e23a7d16-205f-4023-ba6c-44151cb94c7a
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]()
2026年9月19日からダウンロード可能です。
|
Copyright (c) 2024 by the Information Processing Society of Japan
|
|
非会員:¥660, IPSJ:学会員:¥330, ASD:会員:¥0, DLIB:会員:¥0 |
Item type | SIG Technical Reports(1) | |||||||
---|---|---|---|---|---|---|---|---|
公開日 | 2024-09-19 | |||||||
タイトル | ||||||||
タイトル | IoT用センサ端末ソフトウェア自動生成システム | |||||||
タイトル | ||||||||
言語 | en | |||||||
タイトル | The program generation system for IoT sensor | |||||||
言語 | ||||||||
言語 | jpn | |||||||
キーワード | ||||||||
主題Scheme | Other | |||||||
主題 | IoT・ロボット | |||||||
資源タイプ | ||||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_18gh | |||||||
資源タイプ | technical report | |||||||
著者所属 | ||||||||
県立広島大学 | ||||||||
著者所属(英) | ||||||||
en | ||||||||
Prefectural University of Hiroshima | ||||||||
著者名 |
野呂, 正明
× 野呂, 正明
|
|||||||
論文抄録 | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | 近年,IoT が浸透してきており,中小の現場への適用が期待されているが,IoT のシステムは大規模なシステムの展開前に,屋内外にセンサを配置して,その測定結果を統計分析する必要がある.このようなセンサの端末は,市販品として購入可能な場合は少なく,独自の開発が求められることは珍しくない.しかし,このような開発作業を専門家に委託すると非常に高価になるため,小規模な事業者では採用できなくなってしまう.このような問題を解決するため,IoT 用のセンサ端末を入手が用意で,配線が用意な Arduino と Seeed Studio 社の Grove システムを使ったハードウェアで動作するセンサ端末プログラムを生成する環境を開発した.組込みワンボードマイコンに精通していない学生を被検者とした評価を行い,ワンボードマイコンの基礎知識の講義や PC のセットアップに 3 時間,Arduino の実機を用いたセンサ端末の仕様定義から動作確認までの試作作業が 10 分程度で可能であり,本研究の目的である,専門家無しでユーザが IoT 向けセンサ端末の試作が可能であることを確認した. | |||||||
論文抄録(英) | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | In recent years, IoT technology has become widespread and is expected to be applied to small and medium-sized workplaces. There are many applications that require sensors statistical analysis of the measurement results. Some kind of embedded devices for sensor are not commercially available. Therefore users who want to use uncommon sensor must develop own sensor terminal. The development of original sensor terminal make the cost of IoT system to be very large. To decrease this kind of development cost of IoT system, we used Arduino and Seeed Studio's Grove system. We also developed an program code genneration system for arduino base sensor terminal. We evaluate the system with students who were not familiar with embedded microcomputer. The result of evaluation, it takes 3 hours the lectures about embedded microcontrollers and set up work of Arduino IDE. Additionally, prototyping of the sensor terminal was possible in about 10 minutes. From this, we were able to confirm that it is possible for users to prototype sensor terminals without any difficulty without experts of embedded systems. | |||||||
書誌レコードID | ||||||||
収録物識別子タイプ | NCID | |||||||
収録物識別子 | AA1271737X | |||||||
書誌情報 |
研究報告高齢社会デザイン(ASD) 巻 2024-ASD-30, 号 41, p. 1-8, 発行日 2024-09-19 |
|||||||
ISSN | ||||||||
収録物識別子タイプ | ISSN | |||||||
収録物識別子 | 2189-4450 | |||||||
Notice | ||||||||
SIG Technical Reports are nonrefereed and hence may later appear in any journals, conferences, symposia, etc. | ||||||||
出版者 | ||||||||
言語 | ja | |||||||
出版者 | 情報処理学会 |