2024-03-29T09:50:35Zhttps://ipsj.ixsq.nii.ac.jp/ej/?action=repository_oaipmhoai:ipsj.ixsq.nii.ac.jp:001840072023-04-27T10:00:04Z01164:02822:09120:09274
β展開に基づくAD変換器のルックアップテーブル除去によるデジタル回路部の面積削減Area Reduction of Digital Circuit Part in Analog-to-Digital Converter Based on β-Expansion by Eliminating Look-Up Tablejpn設計最適化手法http://id.nii.ac.jp/1001/00183919/Technical Reporthttps://ipsj.ixsq.nii.ac.jp/ej/?action=repository_action_common_download&item_id=184007&item_no=1&attribute_id=1&file_no=1Copyright (c) 2017 by the Institute of Electronics, Information and Communication Engineers This SIG report is only available to those in membership of the SIG.東京都市大学工学研究科東京都市大学工学研究科東京都市大学工学研究科進藤, 佑司瀬戸, 謙修傘, 昊β 展開に基づく AD 変換器のデジタル回路部の面積削減手法を提案する.既存手法のデジタル回路部は,ルックアップテーブル (LUT) を利用して,実効 β 値推定と,β 進数から 2 進数への変換を行っているが,変換精度を高くすると LUT の面積が大きくなるという問題がある.本研究では,LUT 除去のため,ニュートン法による実効 β 値推定と,β 進数から 2 進数への直接計算を提案する.変換精度を増やした際,本提案手法の適用により,既存手法と比べて,デジタル回路部の面積増加を押さえることが可能となる.We propose an area reduction method of digital circuit part in analog-to-digital converter (ADC) based on β-expansion. The digital parts of existing β-expansion based ADCs uses lookup tables (LUTs) to estimate effective β values and to convert nonbinaiy numbers to binary numbers. Unfortunately, increasing the conversion precision of the ADCs increases the area of the LUTs. In this work, in order to eliminate the LUTs, we estimate the effective β values by Newton's method and directly convert non-binary numbers to binary numbers. When the conversion precision of the ADCs is increased, the proposed method reduces the increase of the digital part area compared to the existing LUT-based method.AA12149313研究報告組込みシステム(EMB)2017-EMB-4619142017-10-302188-868x2017-10-27